I’m having a hard time decoding Binary Packets streams.
For example, given the following line (hexadecimal values):
Since PT= C8, the data will have 2*4=8 bytes, meaning two registers. Since the address is 58, I know it will write to register 58 (DREG_GYRO_TIME) and register 59 (DREG_ACCEL_RAW_XY). Now I have a few doubts on how the data is written to each register. I know the total data is E8E0FC20C0300000, but what part gets written to register 58 and what part gets written to address 59? Does it write E8E0FC20 to register 58 and C0300000 to register 59?
Also, where can I see the units written to each register?
Turns out the chip I have is an UM6, not UM7, sorry!
Viewing 2 posts - 1 through 2 (of 2 total)
You must be logged in to reply to this topic.
Thank you very much for your patronage. We are experiencing production and shipment delays due to the coronavirus infection that is currently occurring. We apologize for any inconvenience this may cause. We will work hard to deliver the product as soon as possible. Dismiss