I am using a Venus638FLPx to input timing and pps. The Lat, long and altitude is being passed through but not timing. I am outputting the $PCHRG, it says it will also give yaw and heading used from gps, it does not populate either. The green led on the um7 flashes, I assume that means it sees the pps. Very little info on the nematode input, I did see somewhere it uses recognized for timing. Can someone give me so help on why this is happening. Thanks.
I have tried just about every combination of messages, I believe it could be the time formate. The gps outputs more than 1hz, so the time has three decimal places after the seconds. If the UM7 is expecting hours, minutes and seconds not fraction of seconds, that could be the problem.
Viewing 5 posts - 1 through 5 (of 5 total)
You must be logged in to reply to this topic.
Thank you very much for your patronage. We are experiencing production and shipment delays due to the coronavirus infection that is currently occurring. We apologize for any inconvenience this may cause. We will work hard to deliver the product as soon as possible. Dismiss